7. Temp Module

int sensePin = A0; //This is the Arduino Pin that will read the sensor output

int sensorInput; //The variable we will use to store the sensor input

double temp; //The variable we will use to store temperature in degrees.

void setup() {

// put your setup code here, to run once:

Serial.begin(9600); //Start the Serial Port at 9600 baud (default)

}

void loop() {

// put your main code here, to run repeatedly:

sensorInput = analogRead(A0); //read the analog sensor and store it

temp = (double)sensorInput / 1024; //find percentage of input reading

temp = temp * 5; //multiply by 5V to get voltage

temp = temp - 0.5; //Subtract the offset

temp = temp * 100; //Convert to degrees

Serial.print("Current Temperature: ");

Serial.println(temp);

}